Crow CS-47 Link 사용자 설명서 - 페이지 7

{카테고리_이름} Crow CS-47 Link에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Crow CS-47 Link 20 페이지. Gsm phone line backup

Configuration of the CS-47 unit

The configuration of the CS-47 can be in 3 different ways:

1. Local configuration – using crow graphical interface (PC

software), connecting via D-link cable

2. Local configuration – using crow DTU board, in order to use

the DTU board the configuration must be load to the board

before the installation from a programmed CS47 unit

3. Remote configuration – using a cellular modem with sim card

in the same network, the tool for the configuration is the PC

software.

Graphical User Interface

The graphical user interface of the Mobile Bridge configuration wizard

consists of one window with four tabs, each containing parameters to

configure various options. The tabs are as follows:

Input – Use to configure up to four System inputs.

Output – Use to configure up to four System outputs.

Miscellaneous – Use to configure general System parameters.

Communication – Use to select the telephone dialing prefixe that will be

recognized by the System, for least cost call routing, and for communicating

with the unit.

Each tab contains a number of areas. For example, the Input tab contains

an area to select a specific input, an area to define the phone numbers that

will receive SMS messages about the input, and an area to define the

messages themselves