Epson Stylus C42 Series 사용 설명서

{카테고리_이름} Epson Stylus C42 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus C42 Series 3 페이지. Epson stylus c42ux: quick start
Epson Stylus C42 Series에 대해서도 마찬가지입니다: 빠른 시작 (2 페이지), 설정 매뉴얼 (1 페이지), 설정 매뉴얼 (2 페이지), 설정 (2 페이지)

페이지 인쇄

Instructional Manual Continuous Ink System for use in Epson Stylus C41/C42/C43

Before using this product, please read and follow all instructions. After opening your package, make sure to check that all the accessories

shown in figures 1-1 through 1-3 below.

Conduct Parts Check:

1. Accessories

a. Continuous Ink System (1)

d. Adhesive pads for tube attachment (8)

Fig.1-1

2. Set-Up Continuous Ink System (CIS)

Before installation, layout all your parts in front of your printer.

Check your system for any leakage, and make sure your tubing system is tightly bounded and straight as shown in (Fig. 1-1).

Place the CIS on the right hand side of the printer as shown in (Fig. 2-1), and keep it at the same level with the printer.

Hold down the ink tank with one hand and unplug the original air stopper (Fig. 2-2).

Insert the air breather plugs provided as shown in (Fig. 2-3).

Fig. 2-1

3. Cartridge and Cover Installation

Open printer cover & unplug the printer.

Behind normal cartridge sitting position is a white button, push button in and this allows for the cartridge compartment to move

freely.

Remove original cover, and carefully install CIS cover (Fig.3-1 and Fig.3-2).

Ensuring that colors correspond, push cartridges all the way down in cartridge compartments.

Fig. 3-1

b. Cartridge cover (1)

d. Zip Ties (optional) (6)

Fig 1-2

Fig. 2-2

Fig. 3-2

c. Air breather plugs (6)

f. Syringe (1)

Fig 1-3

Fig 2-3