Epson Stylus C64 사용자 설명서 - 페이지 9
{카테고리_이름} Epson Stylus C64에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus C64 13 페이지. Epson color inkjet printer service manual
Epson Stylus C64에 대해서도 마찬가지입니다: 빠른 매뉴얼 (24 페이지), 제품 정보 시트 (4 페이지), 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (9 페이지), 서비스 매뉴얼 (50 페이지)
페이지 인쇄
Examining the Nozzle Check Pattern
Examine the nozzle check pattern you printed. Each staggered
line should be solid, with no gaps, as shown:
❏ If your printout looks okay, you're done.
❏ If you see any gaps (as shown below), clean the print head
again; see the previous section for instructions.
Aligning the Print Head
If your printouts contain misaligned vertical lines, or you see
light or dark horizontal banding, you may need to align the
print head.
1. Turn on the printer.
2. Load several sheets of paper.
3. Do one of the following:
❏ Windows: Right-click the
taskbar (in the lower right corner of your screen). Select
Print Head Alignment
❏ Macintosh OS X: Open the
select
EPSON Printer Utility
printer list, click
OK
❏ Macintosh OS 8.6 to 9.x: From the File menu, select
or
Page Setup
Print
click the
Print Head Alignment
printer icon on your
.
folder and
Applications
. Select
Stylus C64
, and select
Print Head Alignment
. Click the
button, then
Utility
button.
4. Follow the instructions on the screen to print a test page.
You see a window like this one:
5. On the test page, select the pattern without any visible
bands. You may need to use a magnifying glass or loupe.
6. Select one pattern each for rows 1 to 4, and enter the
number of the best pattern in the corresponding boxes on
the screen. Then click
If you can't find an aligned pattern, choose the one that's
closest to being aligned. Then click
another test page and repeat this step.
7. After you click
When you are finished you see a window like this one:
8. Follow the instructions on the screen to print the next test
in the
page.
.
9. On the test page, select the pair of horizontal bars with the
least noticeable light or dark band between them. You may
need to use a magnifying glass or loupe.
10. Enter the number of the best pattern in the corresponding
box on the screen. Then click
If every pair of horizontal bars has a light or dark band
between them, choose the one that looks the best. Then
click
Realignment
this step.
11. After you click
When you are finished, click
8/03
EPSON Stylus C64
.
Next
Realignment
, repeat steps 4 through 6.
Next
.
Next
to print another test page and repeat
, repeat steps 7 through 10.
Next
.
Finish
EPSON Stylus C64
to print
- 9