Epson Stylus Color 440 사용자 설명서 - 페이지 25

{카테고리_이름} Epson Stylus Color 440에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 440 35 페이지. Color ink jet printer
Epson Stylus Color 440에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 제품 정보 시트 (4 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 제품 정보 시트 (4 페이지), 제품 정보 (13 페이지), 사양 (2 페이지), 설정 및 일상적인 사용 (45 페이지)

Checking your installation

To verify that your USB software installed properly, check the Device

Manager. Click Start, point to Settings, and click Control Panel. Then click

System and click the Device Manager tab.

You should see the device EPSON USB Conversion Cable Devices listed.

Click the + next to the device; you should see EPSON USB Conversion

Cable (EPXUSB1:) listed too.

Note:

If you've installed more than one USB printer device, each new installation

will increase the last digit of the USB conversion cable device name by a

factor of one. For example, a second installed USB printer device would be

listed as EPSON USB Conversion Cable (EPXUSB2:), and a third

installation would be listed as USB Conversion Cable (EPXUSB3).

If the printer doesn't work correctly, uninstall the printer software as

described in your printer documentation. Also uninstall the EPSON USB

printer device software the same way. Then reinstall the USB device and

printer software as described in this guide. If you've installed printer driver

software for the EPSON Stylus COLOR 600, remember to set up your

system to use Windows Print Manager. (See "Setting Up Your System to

Print to the EPSON Stylus COLOR 600" on the next page.)

If you still have problems, contact your EPSON dealer or EPSON technical

support as described in your printer documentation.