Epson Stylus Color 640 매뉴얼 - 페이지 5
{카테고리_이름} Epson Stylus Color 640에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 640 12 페이지. Color ink jet printer
Epson Stylus Color 640에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 제품 정보 시트 (4 페이지), 제품 정보 시트 (4 페이지), 사양 (2 페이지), 설정 및 일상적인 사용 (45 페이지), 온라인 매뉴얼 (8 페이지)
페이지 인쇄
Control Panel
paper out light
black ink
out light
color ink
cleaning
out light
button
The four lights on your printer's control panel show the
printer's status and alert you to problems like paper jams.
The power light is on when the printer is on
P
and ready to print. The power light flashes
when the printer is receiving a print job or
performing a maintenance operation such as
cleaning the print head.
B or A When an ink out light flashes, your ink
supply is low. Make sure you have a
replacement cartridge.
When an ink out light comes on, you need to
replace the ink cartridge. See "Replacing an
Ink Cartridge" for instructions.
When the paper out light comes on, your
S
paper ran out or is incorrectly loaded. Make
sure none of the sheets are curled, creased,
old, stuck together, or too thin. Reload the
paper against the right edge guide and slide
the left edge guide over to the paper's left
edge. Then press the E load/eject button.
When the paper out light flashes, you have a
paper jam. Turn off the printer and gently
pull out all paper. Make sure none of the
sheets are curled, creased, old, stuck
together, or too thin. Reload the paper
against the right edge guide and slide the left
edge guide over to the paper's left edge.
Then turn the printer on.
load/eject
power light
button
power
button
When the Ppower and S paper out buttons
P S B A
flash and the B black and A color ink out
lights come on, jammed paper may be
blocking movement of the print head. Turn
off the printer (press the P power button);
wait 15 seconds; then turn it on again. If this
does not clear the error, contact your dealer
or EPSON as described in the Printer Basics
book.
When all the lights flash, your printer may
have an internal error. Turn off the printer
(press the P power button); wait 15 seconds;
then turn it on again. If this does not clear
the error, contact your dealer or EPSON as
described in the Printer Basics book.
When all the lights are off, the printer is not
receiving power. Try these solutions:
Make sure the printer is turned on.
Turn off the printer, plug in the power
cord securely, and turn on the printer.
Make sure the outlet is not controlled by
a switch or timer and is operable.
7/98
EPSON Stylus COLOR 640
EPSON Stylus COLOR 640
- 5