Epson Stylus Color 640 설정 및 일상적인 사용 - 페이지 32

{카테고리_이름} Epson Stylus Color 640에 대한 설정 및 일상적인 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 640 45 페이지. Color ink jet printer
Epson Stylus Color 640에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 제품 정보 시트 (4 페이지), 제품 정보 시트 (4 페이지), 매뉴얼 (12 페이지), 사양 (2 페이지), 온라인 매뉴얼 (8 페이지)

페이지 인쇄

Note:

Print head cleaning uses both color and black ink. To avoid wasting

ink, clean the print head only if print quality declines.

Use the Nozzle Check utility to confirm that the print head needs to

be cleaned. This saves ink.

When the B or A ink out light is flashing or on, you cannot clean

the print head. Replace the appropriate ink cartridge first.

Do not start the Head Cleaning or Nozzle Check utility while

printing is in progress; otherwise your printout may be marred.

1. Make sure that the P power light is on and that both the B

and A ink out lights are off.

Note:

If the B or A ink out light is flashing or on, you cannot clean the

head, and this operation will start the ink cartridge replacement

procedure. If you do not want to replace an ink cartridge at this

moment, press the

its home position.

2. Hold down the

The printer starts cleaning the print head and the P power

light begins flashing. Print head cleaning takes about one

minute to complete.

Caution:

Never turn off the printer while the P power light is flashing.

Doing so may damage the printer.

3. When the P power light stops flashing, print a few lines from

a document to confirm that the head is clean and to reset the

cleaning cycle.

cleaning button to return the print head to

cleaning button for three seconds.