Epson Stylus Color 660 여기에서 시작하기 매뉴얼 - 페이지 10

{카테고리_이름} Epson Stylus Color 660에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 660 20 페이지. Color ink jet printer
Epson Stylus Color 660에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 제품 정보 시트 (4 페이지), 사양 시트 (2 페이지), 제품 정보 시트 (4 페이지), 제품 정보 (11 페이지), 서비스 매뉴얼 (40 페이지)

Epson Stylus Color 660 여기에서 시작하기 매뉴얼
3. Press the Ppower button to turn on the printer. The Ppower light flashes, the
B black and A color ink out lights come on, and the ink cartridge holders move
left to the installation position.
Always use the
never use an external switch, such as a power strip switch.
4. Lift the two ink cartridge clamps.
Don't open an ink cartridge clamp or remove a cartridge
except to replace it with a new one. Once you remove a
cartridge, you can't reuse it, even if it contains ink.
5. Remove the ink cartridges from their foil packages. Then pull off only the yellow
part of the tape seal on the top of each cartridge.
You must remove the yellow tape
seal from the top of the cartridge or
you will permanently damage it. Don't
pull off the blue part or remove the
clear seal from the bottom of the
cartridge; ink will leak.
P
power button to turn the printer on or off;
3