Epson Stylus Color C60 설정 매뉴얼

{카테고리_이름} Epson Stylus Color C60에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color C60 3 페이지. Color ink jet printer
Epson Stylus Color C60에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 첫 번째 매뉴얼 읽기 (12 페이지), 사양 (1 페이지), 여기에서 시작 (4 페이지), 소프트웨어 설치 매뉴얼 (1 페이지), 사양 (2 페이지), 보충 설명서 (1 페이지), 사용자 설명서 (27 페이지), 호환성 매뉴얼 (1 페이지), 사양 (2 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (2 페이지), 제품 지원 게시판 (4 페이지), 제품 지원 게시판 (7 페이지)

페이지 인쇄

Setting Up the Printer Hardware

1. Unpack

Power cord may come attached

in some countries.

Setup

Quick Guide

The contents may vary in certain locations.

Installing the Printer Software and the Ink Cartridges

For Windows

1. Make sure that printer is off, then turn on your computer.

2. Insert the printer software CD in the CD-ROM drive. If the Installer dialog box

does not appear, double-click SETUP.EXE

SETUP.EXE

SETUP.EXE in the CD-ROM.

SETUP.EXE

3. Select Install Printer

Install Printer

Driver/Utility, and click

Driver/Utility

4. Click OK

OK in the dialog box that

appears.

5. When a message appears

prompting you to turn on the

printer, press the

power button.

The print head moves to the ink

cartridge installation position and

the Setup utility starts

automatically.

Caution:

Do not move the print head

by hand, as this may damage the printer.

6. Follow the Setup utility 掇 on-screen instructions to install the ink cartridges.

Note:

If the Setup utility does not start, follow the instructions in the Macintosh section

of this sheet, beginning from

. Install the ink cartridges.

When ink cartridge installation is complete, proceed to "Load paper and check the print

head nozzles" on this sheet.

For Macintosh

1. Install the printer software

Caution:

Turn off all virus protection programs before you install the printer software.

1. Make sure that printer is off, then turn on your Macintosh and insert the software

CD in the CD-ROM drive.

2. Double-click the Install Software

Install Software

Install Software folder,

Install Software

then double-click the Installer

Installer icon inside it.

Installer

3. Click Continue

Continue

Read this side first!

2. Remove protective materials

Store the protective materials in case

you want to ship the printer in the future.

4. Make sure that the Install Location box

displays the correct drive, then click

Install

Install.

5. Follow the on-screen instructions to

install the printer software.

2. Select the printer

After you have installed the printer software, you need to select your printer.

1. Press the

power button to turn on the printer. The print head moves to the ink

cartridge installation position.

2. Choose Chooser

Chooser

Chooser from the Apple menu.

Then, select the icon for your printer

and the port that your printer is

connected to.

3. Close the Chooser.

3. Install the ink cartridges

1. Open the output tray and the printer cover, then lift up the ink cartridge clamps, as

shown in the illustrations.

ink cartridge clamps

printer cover

output tray

Caution:

Do not move the print head by hand, as this may damage the printer.

2. Remove only the yellow tape

from the new ink cartridges.

Do not touch this part.

3. Position the tabs on each ink

cartridge so that they are resting on top of

the tabs protruding from the base of the ink

cartridge clamps. Do not apply excessive

force to the cartridges.

Note:

Install both ink cartridges. The printer will

not work with only one cartridge.

Print quality is determined by the driver settings and the paper. See the online

Warnings, Cautions, and Notes

Warnings

Cautions

must be followed carefully to avoid

must be observed to avoid damage to

3. Attach the printer parts

paper support

Caution:

If the printer comes on when you plug in the power cord, turn off the printer by

pressing down the P power button until the printer lights go out.

4. Lower the ink cartridge clamps until they lock into place.

5. Close the printer cover.

6. Press the

ink cartridge replacement button.

The printer moves the print head and begins

charging the ink delivery system. This process

takes about one and a half minutes. While the

ink is charging, the

power light flashes and

the printer produces a variety of mechanical

sounds. These sounds are normal.

Caution:

❏

Do not turn the power off during the ink charging process.

❏

Do not load paper until ink charging is complete.

When the ink charging process is finished, the

power light stops flashing and remains

on.

When ink cartridge installation is complete, proceed to "Load paper and check the print

head nozzles" on this sheet.

Load paper and check the print head

nozzles

Before checking the print head nozzles, you need to load paper as shown below. When

loading the paper, make sure that the paper stack fits under the tabs inside the edge

guides and does not exceed the loading limit indicated by the arrow mark on the left

edge guide. To adjust the left edge guide, hold down the locking tab and slide the guide

against the paper stack. Make sure that the position of the edge guide allows the paper

to move up and down freely.

printable side up

locking tab

left edge guide

tab

output tray extension

Once paper is loaded, follow these steps to check the print head nozzles.

For Windows users

1. Click the Start

Start button, point to Settings,

Start

Settings,

Settings, and click Printers

Printers.

Printers

Reference Guide for details on driver settings and available media. Also visit the EPSON Web Site for the latest information.

Notes

contain important information and useful tips

4. Connect the printer

Connect the printer cable to the ports on the computer and the printer.

2. Select the icon for your printer, then click

Properties

Properties on the File menu. Then click

Properties

the Utility

Utility tab.

Utility

3. Click the Nozzle Check

Nozzle Check button, and

Nozzle Check

follow the on-screen instructions.

4. When you are finished, click OK

OK to close

the Properties dialog box.

Your printer is now set up and ready to use.

For Macintosh users

1. Select Page Setup

Page Setup

Page Setup in the Finder 掇 File

File menu.

File

2. Click the

utility icon.

3. Click the Nozzle Check

Nozzle Check

Nozzle Check button,

and follow the on-screen

instructions.

4. When you are finished, click

OK to close the utility dialog

box. Then click OK

OK to close the

Page Setup dialog box.

Your printer is now set up and ready

to use.

in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior

written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for

use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other

printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this

product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as

a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to

this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating

and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any

options or any consumable products other than those designated as Original EPSON Products or EPSON

Approved Products by SEIKO EPSON CORPORATION. SEIKO EPSON CORPORATION shall not be held

liable for any damage resulting from electromagnetic interference that occurs from the use of any interface

cables other than those designated as EPSON Approved Products by SEIKO EPSON CORPORATION.

EPSON is a registered trademark and EPSON Stylus is a trademark of SEIKO EPSON CORPORATION.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks

of their respective owners. EPSON disclaims any and all rights in those marks.

4014092-00

X00