Epson Stylus Photo 1270 제품 정보 - 페이지 10

{카테고리_이름} Epson Stylus Photo 1270에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Photo 1270 11 페이지. Product support bulletin(s)
Epson Stylus Photo 1270에 대해서도 마찬가지입니다: 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 제품 정보 시트 (4 페이지), 사양 (2 페이지), 보충 설명서 (2 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (2 페이지), 제품 지원 게시판 (4 페이지), 제품 지원 게시판 (7 페이지), 설정 매뉴얼 (17 페이지)

Epson Stylus Photo 1270 제품 정보
EPSON Stylus Photo 1270

Cleaning the Printer

To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1. Turn off the printer and wait for the Ppower light to go
out.
2. Unplug the power cord and disconnect the printer cable.
3. Remove all the paper from the sheet feeder.
4. Clean the exterior of the printer with a soft, damp cloth.
5. Clean ink out of the printer's interior with a soft, damp
cloth.
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don't get water on the printer components and don't
spray lubricants or oils inside the printer.

Transporting the Printer

If you move your printer some distance, you need to prepare it
for transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges
installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing
the printer in its new location.
Follow these steps:
1. Turn on the printer, wait until the print head locks in the
far right position, then turn off the printer.
2. Unplug the power cord from the electrical outlet. Then
disconnect the printer cable from the printer.
3. Remove any paper from the printer and remove the paper
support.
10 - EPSON Stylus Photo 1270
4. Open the printer cover. Secure the ink cartridge holder to
the printer with tape as shown, then close the printer cover.
5. Push in the output tray extensions and close the tray.
6. Repack the printer and attachments in the original box
using the protective materials that came with it. See the
unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it.
After transporting the printer, remove the tape securing the
print head and test your printer. If you notice a decline in
print quality, clean the print head (see page 8); if output is
misaligned, align the print head (see page 9).

Related Documentation

TM-870/1270
EPSON Stylus Photo 870/EPSON Stylus
Photo 1270 Service Manual
PL-SP1270
EPSON Stylus Photo 1270 Parts Price
List
CPD-9806
EPSON Stylus Photo 870/1270 Printer
Basics
CPD-9807
EPSON Stylus Photo 870/1270 Start Here
CPD-9821
EPSON Stylus Photo 870/1270
Unpacking the Printer
CPD-9820
EPSON Stylus Photo 1270 printer
software CD-ROM
2/00
Tape the ink cartridge holder
to the printer case