Dillinger Labs Aquarius 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Dillinger Labs Aquarius에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillinger Labs Aquarius 19 페이지.
Dillinger Labs Aquarius에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지)

페이지 인쇄

17. Clusters

Clustering is a power user feature that allows you to take a

group of SKAA speakers and make them act as a single unit.

Check out our YouTube video explaining the Clustering

feature here.

The following Cluster example sets up the Left Aquarius as a

master and the Right Aquarius as a slave.

Step 1: Place two Aquarius speakers near each other

and ensure both of them are turned OFF.

Left

Step 2: Using the Master (left) speaker, hold down the

Bond Button, then turn the speaker ON

Step 3: After a few moments the Bond Indicator will ﬂash

Red, release the Bond Button

Right

press n' hold

press ON

release

Step 4: While the master speaker is ﬂashing red, turn ON

the slave (right) speaker. You should now see the Bond

Indicator on the Slave and Master speakers both ﬂashing

red. Wait 10 seconds.

Step 5: Once the Bond Indicators turn solid red, turn OFF

and ON both speakers.

Congratulations, you have made a Cluster of two speakers!

Step 6: When you connect the master speaker to the

SKAA cmd app, you will see a window similar to the one

shown below. Notice how a SKAA cluster is made using

two speakers with the left speaker as the master.

You can cluster up to 4 receivers of the same type. Check

out our YouTube Guide on Clusters here.