Dillon AP 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Dillon AP에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillon AP 13 페이지. Mechanical ap dynamometer

Introduction

2.2 Third-party shackles and attachments

Dillon supplies shackles and pins with the dynamometers that have been confirmed to

properly work with our mechanical dynamometers. Do not use shackles or shackle pins

that have not been qualified by Dillon. Lower profile non-machined spots can often be

observed and are normal.

If any type of accessory fitting is made for use with the Dillon Dynamometer, be sure to

machine this from high grade aircraft alloy (E4340 steel or equivalent) and heat treat it

in order to ensure maximum safety.

Dillon / Avery Weigh-Tronix is not responsible for failure of attachment fittings

furnished by others.

The Dillon Dynamometer is a precision instrument and will provide many years of

dependable service if given reasonable care and suitable protection. Many firms make

it a regular practice to return Dynamometers to their distributors at 6 to 8 month

intervals (depending upon how much they are used) to have accuracy recertified. We

recommend this at least once a year. Consult with your Dillon distributor concerning

any questions you may have about recalibration intervals. Your area may require

periodic proof testing. Consult your local regulations.

Transport and store the dynamometer in the supplied storage case when not in use.

Dynamometer Installation Instructions