3Com Router 3031 릴리스 노트 - 페이지 4
{카테고리_이름} 3Com Router 3031에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com Router 3031 9 페이지. 3000 dsl series
3Com Router 3031에 대해서도 마찬가지입니다: 릴리스 노트 (7 페이지), 데이터시트 (4 페이지), 데이터시트 (4 페이지), 데이터시트 (4 페이지)
2
C
1: 3C
R
HAPTER
OM
Hardware Accessories
Installation
System Access
SNMP
6000/3000 DSL F
OUTER
AMILY
Incorrect packet received
It is necessary to wait 3 minutes and then repeat the command.
IMPORTANT: For 3Com 6000 Router Family running V2.00 router software. If you
upgrade your router software via tftp and set the destination filename to
secure.bin then tftp will always fail on the first attempt with the following output:
<3Com>tftp <server ip address> get <filename> secure.bin
The file system currently exists. Overwrite it?[Y/N]:y
File will be transferred in binary mode.
Downloading file from remote tftp server, please wait...\
Incorrect packet received
DO NOT use secure.bin as the destination file. Issue the following command
instead
<3Com>tftp <server ip address> get <filename> r6x02_01e.bin
Issue
boot main r6x02_01e.bin
the main image then reboot the router.
For Router 3032/3035 ADSL over ISDN products, standard RJ-11 to RJ-11 cable is
provided for an external splitter with RJ-11 connection. This cable can also be used
for RJ-45 connection if the external device has this type of interface available only.
Issuing the
display current-configuration
DSL Family will result in some packet loss during heavy traffic times. Please
refrain from issuing the current configuration command during peak usage
periods.
The following command does not work:
ftp-directory
user-name ftp-directory flash:
Router does not allow the configuration of FTP server with Radius
Authentication None option. FTP Anonymous login is not supported. A
username and password is required for FTP access.
The FTP server does not support filenames containing spaces. Use underscores
instead of spaces for character separation.
snmp-agent trap enable entity
To enable RFC 2737 (Entity MIB) traps use
command, then undo any unwanted traps types individually.
To disable Entity MIB traps, use
then enable any other wanted traps types individually.
R
N
S
V 2.01
ELEASE
OTES
OFTWARE
from the system view to set r6x02_01e.bin as
. Change the FTP directory to the default:
command missing
undo snmp-agent trap enable
command on the Router 3000
Undo Local-user user-name
Local-user
snmp-agent trap enable
command,