AEMC instruments CA7027 사용자 설명서 - 페이지 16

{카테고리_이름} AEMC instruments CA7027에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEMC instruments CA7027 20 페이지. Fault mapper pro graphical tdr
AEMC instruments CA7027에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄
AEMC instruments CA7027 사용자 설명서

4.12 Single Shot and Continuous Scanning Modes

When the Fault Mapper Pro
mode.
In this mode, the Fault Mapper Pro
test when either the and
To enter "Continuous Scanning" mode press and hold down the
button.
The
Scanning mode is active.

4.13 Typical Fault Displays

The following table shows typical fault traces to assist you in the identifica-
tion of faults using the CA7027:
Type
Cat5 STP
Cat5 UTP
Coax Air
Coax Air Space
Coax Foam PE
Coax Solid PE
14
Find Quality Products Online at:
All manuals and user guides at all-guides.com
Single Shot Mode: Saves on battery life and also enables
the Fault Mapper Pro
while still leaving the fault display on the screen.
icon will appear at the bottom right of the display, when Continuous
Continuous Scanning Mode: Fires pulses into the cable
under test at the rate of 6.7 pulses per second. In this
mode the Fault Mapper Pro
intermittent cable faults.
Vp
72
70
98
94
82
67
GlobalTestSupply
www.
is first switched on, it is set to "Single Shot"
®
only fires a pulse into the cable under
®
buttons or the
TEST /
to be disconnected from the cable
®
is able to more easily identify
®
Z
Type
100
T/Pair Jelly PE
100
T/Pair PE
50/75
T/Pair PTFE
50/75
T/Pair PVC
50/75
T/Pair Paper 72nF
50/75
T/Pair Paper 83nF
Fault Mapper Pro
button is pressed.
TEST /
Vp
Z
64
100
67
100
71
100
58
100
88
100
72
100
Model CA7027
®
.com