Dillon Precision Products RL 550B 사용 설명서 - 페이지 8

{카테고리_이름} Dillon Precision Products RL 550B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillon Precision Products RL 550B 18 페이지.

Fig. 6 - Showing the shellplate in its proper position:

under the ejector wire with the shellplate number up.

Fig. 7 - This photo shows the index star in its proper

position: the locating tabs centered in the shellplate.

Place the index sprocket on top of the shellplate

(making sure the locator posts go into the

corresponding holes in the shellplate, see Fig. 7).

Fig. 8 - Inserting the shellplate bolt, first through the index

sprocket then the shellplate.

Fig. 9 - This photo shows the proper method of

indexing the shellplate and the proper installation of

the locator buttons.

Next, insert the shellplate bolt through the

sprocket and plate and into the center hole of the

platform, Fig. 8. Tighten with the supplied Allen

wrench to the point where you are unable to turn the

sprocket by hand. Now, back off the bolt slightly,

allowing you to push the sprocket easily with your

thumb, Fig. 9. There should be no looseness or slop at

this point and when you rotate the plate, you should

be able to feel and hear the index ball "click" into

place under the shellplate.

* Indicates a caliber specific part. See the caliber conversion

chart on page 16 for the caliber you are loading for.