Dillon Precision Products D-Terminator 사용 설명서 - 페이지 6
{카테고리_이름} Dillon Precision Products D-Terminator에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dillon Precision Products D-Terminator 7 페이지. Electronic scale
페이지 인쇄D-Terminator Scale, May 2007
Fig. 17
4. Press the "ZERO" button (this will
"zero out" the scale). FIG 17.
Wait until the display reads "0.00"
grams.
Press the "ZERO" key at any time to
re-zero the scale. This is a good idea if
the scale is moved during a weighing
process.
At this point the scale can be used to
weigh any object that will fit on the
platform (within the weight range of the
scale).
5. FIG 18. Pour the powder into the
pan. Allow 4 to 5 seconds for the dis-
play to settle (because of the scales
extreme sensitivity, the display may
fluctuate slightly, if so, check for vibra-
tion or air movement). Read the weight
Fig. 18
5/22/07
8:34 AM
Page 6
on the scale.
6. Turn the scale off when you are
finished.
CAUTION:
1. Place objects onto the weighing
platform VERY GENTLY.
2. Do Not weigh any object which
will exceed the capacity of the scale.
This could permanently damage the
load cell sensors. (The scale's capacity
of 900 grains is equal to about 2.0
ounces). The powder pan weighs about
190 grains and this must be considered.
3. Turn off the scale when not in use
by pressing the "ON/OFF" key. This
will prevent unnecessary battery drain.
Also unplug both ends of the AC
adapter when the scale is not in use.
4. Always keep the calibration
weight clean. The effects of accumulat-
ed body oils and dirt can cause the cal-
ibration operation to be off by 1/10th of
a gram or more.
5. Always keep the unit away from
heat and direct sunlight.
6. The scale should be kept clean
and away from moisture. Only clean
with a clean dry cloth.
PACKAGE CONTENTS:
1 – Dillon D-Terminator Scale
1 – Weighing Platform
1 – Draft Shield (anti-static cover)
4 – AA batteries
1 – 50 gram Calibration Weight
1 – AC Adapter
1 – Powder Pan
5