Motorola A780 서비스 매뉴얼 - 페이지 30
{카테고리_이름} Motorola A780에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola A780 48 페이지. J2me
Motorola A780에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (5 페이지)
페이지 인쇄
Disassembly
Removing and Replacing the Keypad PCB Assembly
Flip Lens
28
1.
Remove the battery cover, battery, SIM card, stylus, rear housing, and
transceiver board assembly, flip assembly, and flip inner cover as described in
the procedures.
2.
Remove the 2 screws securing the keypad PCB assembly. Retain the screws
for reassembly. See Figure 12a.
3.
Using the disassembly tool, gently lift up the keypad PCB assembly and
disconnect the flex connector. See Figure 12b.
A
Keypad PCB Assembly
Flex Connector
B
Figure 12. Removing the Keypad PCB Assembly
4.
To replace, insert the flex connector squarely into its mating connector on the
back of the keypad PCB assembly and press firmly until it snaps into place.
5.
Replace the 2 screws securing the keypad PCB assembly and tighten to a final
torque setting of 1.5 inch pounds. Do not over tighten.
6.
Reassemble and replace the flip assembly, transceiver board assembly, rear
housing, stylus, SIM card, battery, and battery cover as described in the
procedures.
September 20, 2004
Screw Locations
Disassembly Tool
Earpiece
A780
Loud Speaker
6809488A90