Epson TM-H6000II 매뉴얼 - 페이지 10
{카테고리_이름} Epson TM-H6000II에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-H6000II 13 페이지. How to connect printer with a wireless adapter
Epson TM-H6000II에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 브로셔 (2 페이지), 사용자 설명서 (15 페이지), 사용 설명서 (12 페이지)
![Epson TM-H6000II 매뉴얼](/uploads/products/server2/607943/607943.jpg)
How to connect an Epson POS printer with Ethernet Interface
Configuration Utilities to Run on the Computer
Epson Flash Utility
The Epson Flash Utility is normally installed with the Epson printer drives. It is used to upload bitmaps to Epson printers,
but has a simple communication test which will check for basic connectivity between the computer and the printer.
Pressing the "Comm. Test" button on the Setup tab of the utility will give a go/no-go indication of basic connectivity.
Installing the Printer Driver in Windows
Installing the TMNet utility also installs the printer driver in Windows. The printer should be visible in the printers folder of
the Windows Control Panel.
Configuring the Printer in Windows
You need to make a few changes in the printer settings to get it to work with the Ethernet adapter. Specifically you need
to configure the port you are using. Open the printer in the Windows Printer Folder. Select the Ports Tab. Turn off
bidirectional support, if enabled.
You must now add the port as s TCP/IP port. Press "Add Port" and select "Standard TCP/IP Port" , then select "New
Port".
http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]
download drivers on the printer page
6. Click the