Epson ActionTower 3000 Computer 첫 번째 매뉴얼 읽기 - 페이지 25
{카테고리_이름} Epson ActionTower 3000 Computer에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionTower 3000 Computer 29 페이지. Product information guide
Epson ActionTower 3000 Computer에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 제품 정보 매뉴얼 (11 페이지), 빠른 설정 매뉴얼 (4 페이지)
페이지 인쇄
d.
So you rebooted your system using
e.
And the system did not load your sound card or
CD-ROM drivers.
If so, reset the computer by turning it off, waiting 20 seconds,
and turning it back on again. This should resynchronize the
sound card. If your computer still has trouble recognizing a
program after you run a memory-intensive one, do not
press
wait 20 seconds, and turn it back on again.
If your system locks up when it attempts to load your
sound card or CD-ROM drivers and will not completely
boot, your sound card or CD-ROM drive may be defective.
In order to continue using your system while you
investigate the problem, follow these steps:
1.
Turn off the system.
2.
Insert a bootable diskette and turn on your system
3.
After it boots, log onto the root directory of your hard
disk.
4.
Edit the AUTOEXEC.BAT and CONFIG.SYS files (as
described in step 1 on page 19) and add
to the beginning of any command lines that affect your
sound card and CD-ROM drive. (Or restore your
original system files as described in the next section.)
5.
Remove the bootable diskette
6.
Reboot your computer from the hard disk drive.
Contact your Authorized EPSON Customer Care Center or
the EPSON Connection to report the problem with your
sound card or CD-ROM drive; see page 6 for instructions.
22
Read This First
Ctrl Alt Del
to reboot it; instead, turn off your system,
Ctrl Alt Del
(remark)
REM