Epson Apex 제품 지원 게시판 - 페이지 4

{카테고리_이름} Epson Apex에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Apex 29 페이지. Product support bulletin(s)
Epson Apex에 대해서도 마찬가지입니다: 제품 정보 매뉴얼 (3 페이지), 제품 지원 게시판 (45 페이지), 제품 지원 게시판 (21 페이지)

페이지 인쇄
Epson Apex 제품 지원 게시판
Subject:
Equity and Apex Series Compatibility with the System OmniBridge
Controller and BridgeFiler External Floppy Drives

Date:

04/11/90
Page:
1 of 3
The purpose of this bulletin is to provide the results of compatibility testing
conducted by the Computer Product Support Center with the Sysgen
OmniBridge controller and Bridge - Filer external floppy disk drives.

Equity I

Equity II

Equity III
Equity I +
Equity le
Product Support Bulletin
Comments
The Equity I was found compatible with the OmniBridge
controller. It was able to support one or two external
disk drives (daisychained) together. The external drives
could be used as high density (1.2M and 1.44M) or
normal (360K and 720K) disk drives.
The Equity II was found to be totally incompatible with
the OmniBridge controller.
The Equity III was found compatible with the OmniBridge
controller. It was able to support one or two external
disk drives (daisychained) together. The external drives
could be used as high density (1.2M and 1.44M) or
normal (360K and 720K) disk drives.
The Equity I + was found compatible with the
OmniBridge controller.
two external disk drives (daisychained) together. The
external drives could be used as high density (1.2M and
1.44M) or normal (360K and 720K) disk drives.
The Equity le was found compatible with the OmniBridge
controller. It was able to support only one external
floppy drive, unlike the other models tested. The drive
could be used as a high density (1.2Mb and 1.44Mb) or
normal (360K and 720K) disk drive.
PSB No:
Originator:
It was able to support one or
S-0088B
KAS 60