Crown DSi 8M 운영 매뉴얼 - 페이지 8

{카테고리_이름} Crown DSi 8M에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crown DSi 8M 20 페이지. Cinema system monitor
Crown DSi 8M에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 사양 (2 페이지), 사양 (2 페이지)

페이지 인쇄

3 Installation

3.1 Materials Required

You will need to supply the following materials:

• Shielded audio cable for connecting the DSi 8M to the

cinema processor and power ampliﬁ er inputs

• Twisted wire for connecting the DSi 8M to non-DSi power-

ampliﬁ er outputs

• Four 10-32 x 1/2" screws to mount the DSi 8M in the

audio equipment rack

• Small standard screwdriver

• No. 2 Philips screwdriver

• Wire strippers

3.2 Mount the DSi 8M

The ideal place for the DSi 8M Monitor Panel is in the sound

rack or projector console between the stereo proces sor and

power ampliﬁ ers. DB25 and HD15 connectors are available

on the back panel to make installation quick and easy.

Alternatively, terminal blocks allow the use of stripped and

tinned wire. They are pluggable for easy service and

troubleshooting.

page 8

DSi 8M Cinema System Monitor

3.3 Monitor Wiring

1. Connect to AC Power.

Connect the unit to the AC power outlet using the

stan dard IEC cable provided. Any power source from

100-240V , 50-60 Hz will be sufﬁ cient. Plug the

Modular Power Supply into the Bypass Power input and

into a power source that matches the Modular Power

Supply requirements.

(continued)

Operation Manual