Epson Apex 200 제품 지원 게시판 - 페이지 6
{카테고리_이름} Epson Apex 200에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Apex 200 12 페이지. Product support bulletin(s)
Epson Apex 200에 대해서도 마찬가지입니다: 제품 지원 게시판 (45 페이지)
페이지 인쇄
Q. What kind of floppy disk drive does the APEX 200 have and what kind of
floppy diskettes should I use?
A. The APEX 200 - series computers use a half - height, 5 1/4", 1.2MB floppy
disk drive. You can use both double - sided, double - density, soft - sector,
48 TPI, floppy diskettes
high - density, soft - sector, 96 TPI floppy diskettes for 1.2MB capacity. The
360KB diskette boxes are usually marked DSDD or 2S - 2D, Soft - Sector,
48TPI and the 1.2MB diskette boxes are marked DSHD or 2S- HD, 96TPI.
New blank diskettes must be formatted using the MS - DOS utilities provided
before being used. You must use the command "FORMAT /4" to format
the 360KB double density diskettes.
Q. Is it possible to disable the APEX 200 floppy disk controller?
A. Yes, by changing jumper 2 on the SPF2 board from the A to the B
position.
Q. Can I use other types of floppy disk drives with the APEX 200?
A. 5.25", 360KB, half - height floppy disk drives are compatible with the APEX
200 personal computer. The Epson 3.5", half - height, 720KB floppy drive
(Epson Model code A112A- AA) and the Epson 3.5", half height, 1.44MB
floppy disk drive (Epson Model code A811151) have been tested with the
APEX 200 computer and are compatible (available from Epson Computer
Products dealers).
with a matching front bezel.
Q. How do you disable the parallel port on the APEX 200?
A. To disable the parallel port, jumpers J3 and J4 on the SPF2 board must
be set to position BC. To enable the parallel port, set the jumpers to AC.
for 360KB capacity and double- sided,
These Epson drives come mounted on a 5.25" frame
PSB No: S-0098
Page: 3 of 8