diLUSSO TH919DSL 사용자 설명서 및 설치 지침 - 페이지 5

{카테고리_이름} diLUSSO TH919DSL에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. diLUSSO TH919DSL 16 페이지. Telescopic hood

Specifications

Input

Absorption

Lamps

Total Power

Vented system must be terminated to the outside. Ductwork can extend either through

the wall or the roof. Do not terminate the vent system in an attic or other enclosed ar-

ea.

The length of the ductwork and the number of elbows should be kept to minimum to

provide efficient performance. The size of the ductwork should be uniform. Do not

install two elbows together. Use duct tape to seal all joints in the ductwork system. Use

caulking to seal exterior wall or floor opening around the cap.

Flexible ductwork is not recommended. Flexible ductwork creates back pressure

and air turbulence that greatly reduces performance.

Make sure there is proper clearance within the wall or floor for exhaust duct before

making cutouts. Do not cut a joist or stud unless absolutely necessary. If a joist or stud

must be cut, then a supporting frame have to be constructed.

TH619DSL

: 220-240V~

/ 50-60 Hz

: 130W

: 2 x 2W

: 134W

TH919DSL

220-240V~

/ 50-60 Hz

130W

2 x 2W

134W

TH633DSL

220-240V~

/ 50-60 Hz

260W

2 x 2W

264W

TH933DSL

220-240V~

/ 50-60 Hz

260W

2 x 2W

264W