Motorola APX 7000 XE UHF 지침 - 페이지 2
{카테고리_이름} Motorola APX 7000 XE UHF에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola APX 7000 XE UHF 3 페이지. Digital portable radios
Motorola APX 7000 XE UHF에 대해서도 마찬가지입니다: 빠른 참조 카드 (2 페이지), 빠른 참조 매뉴얼 (44 페이지)
페이지 인쇄
LA-RICS Motorola APX 7000 XE UHF, 7/800 Multi-band Radio
LA-RICS Motorola APX 7000 XE UHF, 7/800 Multi-band Radio Cont
Main Screen
H
AES
1450
1450
Z4 D9/D4
CAS D9
LASD 5358
Zone
Chan
Scan
Use the Left/Right Arrow Pad to access the Main, Second & Third Screen.
(A forth screen can be found on the Dynamic Zones)
Note: the LASD display back lighting cannot be turned off.
9
MOTOROLA
H
AES
1450
Z4 D9/D4
CAS D9
LASD 5358
Zone
Chan
Scan
1
2
3
,.?
ABC
DEF
4
5
6
MNO
GHI
JKL
7
8
9
PQRS
TUV
WXYZ
0
*
#
Programming Scan
(Cross Scanning Analog & Digital Not Available)
Scan On / Off:
Press and release the soft key
Scan Nuisance:
Use the Left/right arrow pad to find "Nuis", Press & Release the soft key
To View the Scan List:
Use the Left/right arrow pad to find the "ScnL", Press & Release the soft key
Press & Release the soft key
Enter / Delete Channel
Use the Left/right arrow pad and find "ScnL", Press & Release the soft key
into the Scan List:
Use the Left/right arrow pad to select the Zone, and the up/down arrow pad to select the channel,
Press & Release the soft key for "Sel"
Press & Release the Home key
6 June 2015
Communications Solutions 323-881-8033, JRH
A PDF of this can be found at http://intranet/intranet/bureaus/cfmb/communications/index.htm
Note: This information may change with out notice.
Second Screen
H
AES
1450
Z4 D9/D4
CAS D9
LASD 5358
ScnL
Batt
Mute
Clck
H
OUT RNG
AES
1450
Z4 D9/D4
CAS D9
Out of range
Zone
Chan
LA-RICS displays will turn RED
if repeaters are out of range or
not available
Radio Buttons
Press and release to cancel an action
Press and hold for the SCC Access Channel
Not used
Use the left - right - up - down arrow pad to navigate
Emergency Trigger button (is reset by turning the radio off / on)
LASD - Scan Delete / LA-RICS - Site Display ( displays current radio site connected to )
LASD - Squelch release, disables the squelch circuit to hear distant stations or check volume level /
LA-RICS - Display light on / off
Key locks the radio keypad, press to lock or unlock
ANALOG or Digital
"Rcl" to cycle through the current channels in your scan list.
Display & Icons
Third Screen
H
AES
Z4 D9/D4
CAS D9
LASD 5358
H
Prfl
Loc
AES
Z4 D9 / D4
CAS D9
H
Scan
Soft keys refer to the display for use
the radios zones & menu's
Warning: Scanning can distract the user from their home
Frequency traffic, and possibly drain the battery faster than normal
You can not talk on a scanned channel unless you place
the radio on the correct zone and channel.
below "Scan"
or "Del"
to add or delete the channel to, or from your list.
to exit programming
Battery status indicator
Tone indicator ( FCC required)
Scan indicator, also used to indicate programed scan channels
Direct indicator,
(LA-RICS Channels NO Direct)
High power indicator
GPS indicates On or Off
Signal strength
Designates encryption mode and On / Off
Zone and channel information
Zone
Press to change Zones, Sel to enter
Press to change channels, Sel to enter
Chan
Scan
Press to select scan on or off
ScnL
Press to program the scan list
Batt
Press to see battery status Impress Only
Mute
Press to turn Sub Audible tones on and off
Clck
Press to access time functions
Prfl
Press to access audio & lighting profiles
Loc
Press to access GPS info & on / off
ZnPr
Located on the Dynamic Zones and is used
for programming the Dynamic Zone
Rfsh
GPS forced to refresh current location
Edit
Allows renaming or changing of parameters
channel locked out. To cancel turn the radio off and on
Cont,
Page 2 of 3