Motorola CDM1250 사용자 설명서 - 페이지 49

{카테고리_이름} Motorola CDM1250에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CDM1250 50 페이지. Cdm-series control station
Motorola CDM1250에 대해서도 마찬가지입니다: 서비스 및 설치 매뉴얼 (32 페이지)

페이지 인쇄

Sending a Call

1. Turn radio on and select appropriate zone and channel.

2. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,

and speak clearly into it.

3. Release PTT to listen.

Receiving a Call

1. Turn radio on and adjust volume to the desired level.

2. Select desired channel.

3. To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches

(2.5 to 5 cm) from your mouth, and speak clearly into it.

Deleting a Nuisance Channel During Scanning

1. While radio is on a nuisance channel, hold down preprogrammed Scan button

until you hear a tone.

2. Release Scan button.

Making a Phone Call

1. Press Phone button, or select Phone from the menu.

2. If access code is not displayed, send access code if required.

3. Send phone number in one of the following ways:

• Press and release PTT to send last dialed number.

—or—

• when using enhanced keypad microphone only, press preprogrammed

Speed Dial button, followed by a keypad key (1–8), to access first nine num-

bers in your phone list. (Press PTT if buffered dial.)

—or—

• when using enhanced keypad microphone only, enter phone number using

the keypad. (Press PTT if buffered dial.)

4. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,

and speak clearly into it.

Ending a Phone Call

1. Send deaccess code if required.

2. Press preprogrammed Phone button, or press the Exit key.

Sending and Cancelling an Emergency Alert

• To activate Emergency Alert, press preprogrammed Emergency button or

footswitch.

• To cancel, press and hold down Emergency button.

CDM1250

Record the functions for your radio's programmable buttons in the table

provided below. For further information, see page 6 of this User Guide.

Red/Yellow/Green

LED Indicators

LCD Screen

On/Off/Volume

Knob

Microphone

Jack

Programmable

Button 2 (P2)

Button 1 (P1)

(Interchangeable)

Button

Function

Short Press

™

Quick Reference Card

Channel Selector

(Up/Down)

Programmable

Button 3 (P3)

(Interchangeable)

Programmable

Button 4 (P4)

(Interchangeable)

MAEPF 26782 O

Long Press

Hold Down

Page