Motorola CLP1040 사용자 설명서 - 페이지 23

{카테고리_이름} Motorola CLP1040에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CLP1040 48 페이지.

Item Number

3.6.1

Charging a Stand-Alone Battery with the Drop-in Tray Charger

Procedure:

1 To charge the battery, insert the connector of the power supply into the micro Universal Serial

Bus (USB) port on the front of the drop-in tray charger.

2 Connect the power supply to a proper AC outlet.

3 Insert the battery into the tray, with the inside surface of the battery facing the front of the

charger. See

Stand-Alone Battery on page

4 Ensure that the slots in the battery are correctly engaged in the charger.

3.6.2

The following tables provide the estimated charging time of the battery.

Table 5: Estimated Charging Time

Charging Solution

Single Unit Charger

Multi-Unit Charger

3.7

Procedure:

1 Place the drop-in Tray Single Unit Charger (SUC) on a flat surface.

2 Insert the connector of the power supply into the Micro USB port on the front of the drop-in tray

charger.

3 Connect the correct power supply to a proper AC outlet.

4 Insert the radio with battery installed into the tray, facing down and making sure that the

charging contacts on the charger are aligned with the contacts on the radio.

Description

Micro-USB port

22.

Battery Type

Standard Lithium-Ion Bat-

tery

4 hours

2.5 hours

68012000044-ED

Chapter 3 : Battery and Charger

High Capacity Lithium-Ion

Battery

5.5 hours

4 hours