Motorola CM160 사용자 설명서 - 페이지 33

{카테고리_이름} Motorola CM160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CM160 46 페이지. Commercial series controlhead
Motorola CM160에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 서비스 정보 (26 페이지), 기본 사용 설명서 (12 페이지)

페이지 인쇄

MAKE A PHONE CALL D

Press the preprogrammed Phone button and

proceed to step 6.

– or –

Press the PTT button, and if the Hot Keypad feature

has been preprogrammed by your dealer, do the

following:

to select a channel that has been

programmed for telephone.

to enter menu mode.

PHONE

until

PHONE

to select

Your dealer can preprogram your radio in one

of three ways to enter your access code to the

repeater.

Immediate Auto – automatically sends the

access code.

Delayed Auto – your radio will transmit the

access code upon a PTT button press.

Manual - Press and hold the microphone PTT

and enter your access code using the DTMF

microphone keypad. Release the microphone

PTT on completion.

When you hear a dial tone:

XXXXXXX

Enter the phone

number using the

DTMF microphone

keypad.

The number will scroll

to the left,

– or –

XXXXXXXX

to select a

number from the

phone list. (Only the

first 8 digits are

displayed.)

– or –

a. Press and release the preprogrammed

Speed Dial button.

b. Press the key (0 to 9) corresponding to

the number you want to call.

To redial the last number dialed (if not using

Speed Dial), press and release the PTT

button immediately after the access code is

sent. The radio sends the last number dialed.

– or –

English