Motorola EMS APX 7500 사용자 설명서 - 페이지 25

{카테고리_이름} Motorola EMS APX 7500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola EMS APX 7500 44 페이지. Multiband mobile radio
Motorola EMS APX 7500에 대해서도 마찬가지입니다: 브로셔 (8 페이지), 제품 사양서 (5 페이지)

페이지 인쇄

The radio does not begin scanning again for a predetermined

hang time after you release the PTT button, allowing the other

party to respond. If the other party responds within the hang

time, scanning does not resume until the full hang time expires

after they have finished speaking, allowing the conversation to

be completed.

To transmit on the selected channel if another channel is active,

first turn scan off by pressing the Menu Select button below

SCAN momentarily.



Radio Programmed for Non-Talkback Scan

Procedure:

Press the PTT button at any time to transmit on the selected

channel or fixed channel.

To make a Call Alert page, or Private Conversation call while

scanning, press either the Menu Select button directly below

PAGE

CALL

. The call is entered on the selected channel and

scanning is halted until the call is exited by pressing

pressing the Menu Select button below either

English



Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise

(termed a "nuisance" channel), you can temporarily remove the

unwanted channel from the scan list.

This capability does not apply to priority channels or the

designated transmit channel.

Procedure:

When the radio is locked onto the channel to be deleted,

Press the Menu Select button directly below NUIS.



Restoring a Nuisance Channel

Procedure:

To restore the deleted nuisance channel, do one of the

following:

•

Turn scan off, then on.

PAGE

CALL

•

Change modes.

•

Turn off the radio, and then turn it back on.

Nuisance mode delete can be disabled by the system

administrator.

11/2/15

to NUIS.