Motorola GP280 사용자 설명서 - 페이지 27

{카테고리_이름} Motorola GP280에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP280 46 페이지. Professional radio, power distribution and controller
Motorola GP280에 대해서도 마찬가지입니다: 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 사용자 설명서 (46 페이지), 서비스 정보 (30 페이지)

Motorola GP280 사용자 설명서
2. The green LED and call received status
,
annunciator, F
will blink indicating that a call is
being received. You have 20 seconds to
answer the call before the radio automatically
returns to the home display.
3. Press the call response button or the call
button.
4. The display shows the
incoming caller's ID
number, and the call
received annunciator will
turn off.
5. After viewing the caller's ID number, you can
decide to either talk privately (go to next step),
or not answer the call by pressing the call
response or call button to return to the home
display.
6. If you decide to answer the call, press the PTT
switch.
7. The caller's ID number
remains displayed for the
duration of the call.
8. When finished with conversation, press .
or the call response button to hang up.
9. The radio will return to
Note: If you press the PTT switch before you press
ID: 722588
Making a Private Call
(GP280 radios only)
There are four phases in making a private call, namely
• initiating a private call,
• entering the desired radio ID number,
• sending the radio ID number, and
• having the conversation and hanging-up.
ID: 722588
Initiating a Private Call
1. Press / until CALL is
2. Press l (the softkey below CALL).
the home display.
the call response button, the response will be
transmitted to everyone in the talkgroup (a
dispatch mode operation).
• After answering a Private Call, the caller's ID
number is stored in your radio as the "last ID
number received".
• If your radio is configured for Private Call II,
upon receiving a Private Conversation call, two
alert tones sounds, followed by the received
voice.
displayed.
PLANT POLICE
ZONE MUTE CALL
English
23