Epson EL 4S/33+ 제품 지원 게시판 - 페이지 11

{카테고리_이름} Epson EL 4S/33+에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EL 4S/33+ 11 페이지. Os/2 2.0 display drivers
Epson EL 4S/33+에 대해서도 마찬가지입니다: 사양 (11 페이지)

페이지 인쇄

PROBLEM SOLVING

Q19.

When using my joystick with the computer's built-in game port, some

of my games do not allow movement to the right or in a downward

motion?

Some joysticks may not calibrate (function) properly with certain game

software applications that accept joystick input. If you connect a joystick to

the computer's built-in game port and you find that it does not work with the

game software you are using, try the following:

Reposition the trim knobs on the joystick. (See the manual that came

with it for instructions.) Then try it again.

If adjusting the joystick's trim knobs does not solve the problem, you

may want to purchase a joystick option card. Install the card as

described in Chapter 3 of the EL 486UC's User's Guide; then set

jumper J5 on the computer's main logic board to the 2-3 position to

disable the built-in game port. (See page 3-9 of the EL 486UC's User's

manual for instructions.)

Q20.

When the computer is powered-on, it completes the power-on self-

test, starts to boot off the hard disk drive but then locks-up. What

may be causing this problem?

This problem may be due to an improper setting in the computer's SETUP

program. To insure proper system operation, always set the Shadow BIOS

ROM and Shadow Video ROM setup options to WP-Shadow.

The computer's SETUP program may be accessed by pressing CTRL, ALT

and "S" while at a DOS prompt or during the computer's boot process.

PSB No: S-0168

Page: 9 of 9