Motorola GP280 사용자 설명서 - 페이지 29

{카테고리_이름} Motorola GP280에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP280 46 페이지. Professional radio, power distribution and controller
Motorola GP280에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지), 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 서비스 정보 (30 페이지)

페이지 인쇄

UG_240_280_EN.fm Page 25 Wednesday, August 14, 2002 10:30 AM

4c. If there are 10 or more members in the list,

the display shows "ID LOC#X_" (where X is

the first digit). The cursor blinks to show the

location of the second digit.

4d. Enter the second digit of the location number.

4e. The radio goes to that

position in the list. The

display alternates

between showing the

member's name and ID

number.

Note: The last member of the list is also the "last ID

transmitted or received" at position "00" on the

list.

• If you enter a location number that does not

exist (for example, "15"), the display will show

"INVALID ENTRY," and the radio will sound an

invalid-keypress tone and return back to step 4b

of this procedure.

Sending the Radio ID Number

5. Press the PTT switch to transmit the ID

Downloaded from

www.Manualslib.com

number.

Alternates between

JB SMITH

and

ID: 784116

manuals search engine

7. If the party you are call-

ing does not answer the

call within twenty

seconds, the telephone

ringing stops and an

alert tone sounds.

At this point you can either send a Call Alert

page, or go to step 10 to hang up.

8. If the party you are calling answers the call,

you will hear their voice.

Note: If the radio you are calling is not in service,

you will not hear the ringing and the display will

show "NO ACK". Go to step 10 to hang up.

• If your radio is configured for Private Call II,

you will not hear the telephone type ringing.

Instead you are able to proceed to talk to the

Called party.

Having the Conversation and Hanging-up

9. Press the PTT switch to have a Private

Conversation with the called person.

10. When finished with your conversation, or if the

NO ANSWER