Motorola GTX 사용자 설명서 - 페이지 18

{카테고리_이름} Motorola GTX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GTX 49 페이지. 900mhz two way mobile radio
Motorola GTX에 대해서도 마찬가지입니다: 서비스 매뉴얼 (30 페이지), 사용자 설명서 (36 페이지), 설치 매뉴얼 (19 페이지), 사용자 설명서 (25 페이지)

페이지 인쇄

chargers

WPLN4111AR

WPLN4130A

Display Readout

RLN5382A

IMPRES™ Smart Energy Systems

Through the use of its advanced charging algorithm and automatic reconditioning features,

the IMPRES Smart Energy System ensures maximum talk-time and optimized battery cycle

life. This smart energy system automatically reconditions IMPRES batteries based on actual

usage, keeping them in peak condition. Talk-time and cycle life are optimized and the need

for manual maintenance programs is eliminated. Its advanced conditioning features allow

batteries to be safely left on the charger for extended periods of time without incurring the

damaging heat build-up which can decrease battery cycle life. In addition, batteries left in

the charger are kept fully charged so they are always ready when needed. This rapid-rate,

tri-chemistry charging system will also charge compatible non-IMPRES batteries and sup-

ports multiple radio platforms including SABER, XTS and HT 1000 Series portables.

IMPRES™ Single-Unit Chargers

WPLN4111AR

IMPRES Single-Unit Charger, 110 Volt, US Plug

WPLN4112AR

IMPRES Single-Unit Charger, 220 Volt, Euro Plug

WPLN4113AR

IMPRES Single-Unit Charger, 240 Volt, UK Plug

5889254E01

Battery Adapter. Required for NTN4538DR,

NTN4593DR, NTN7014BR and NTN8818A batteries.

IMPRES™ Multi-Unit Chargers

WPLN4108BR

IMPRES Multi-Unit Charger, 110 Volt, US Plug

WPLN4109BR

IMPRES Multi-Unit Charger, 220 Volt, Euro Plug

WPLN4110BR

IMPRES Multi-Unit Charger, 240 Volt, UK Plug

4385922B01

Battery Adapter. Required for NTN4538DR,

NTN4593DR, NTN7014BR and NTN8818A batteries.

NLN7967A

Wall Mount for Multi-Unit Chargers

IMPRES™ Multi-Unit Chargers with Display Modules

Charger Display Modules provide powerful, "real time" analyzing information for IMPRES

batteries, including current charge status, battery mAh, percent rated capacity and battery

voltage. Readout displays battery kit number, serial number and chemistry and the time

remaining to complete the charge for NiCd and NiMH batteries. It also forecasts the number

of cycles to next reconditioning and more.

WPLN4130A

IMPRES Multi-Unit Charger with Display Modules, 110 Volt, US Plug

WPLN4131A

IMPRES Multi-Unit Charger with Display Modules, 220 Volt, Euro Plug

WPLN4132A

IMPRES Multi-Unit Charger with Display Modules, 240 Volt, UK Plug

4385922B01

Battery Adapter. Required for NTN4538DR,

NTN4593DR, NTN7014BR and NTN8818A batteries.

NLN7967A

Wall Mount for Multi-Unit Charger

IMPRES™ Individual Charger Display Module

This module is compatible with the standard IMPRES™ Multi-Unit Charger WPLN4108BR,

WPLN4109BR and WPLN4110BR. Up to 6 modules can be used per charger, one for each

charging pocket. Includes detailed installation instructions.

RLN5382A

Charger Display Module for IMPRES Multi-Unit Charger

Version 1.3 or Later.

Note: Display Modules compatible with Multi-Unit Charger version 1.2 or earlier require a

software flash update.

Version number is located on label on the bottom of the IMPRES™ Multi-Unit charger. If no

version is shown, it is earlier than version 1.2. Version 1.2 will appear as V1.20, 1.3 will

appear as V1.30, etc.

IMPRES™ CD

This CD provides an interactive guide to the

fits and gives examples of application usage.

0180305J70

IMPRES CD

IMPRES

Charging System. It outlines the bene-