Epson Endeavor 486C 제품 정보 매뉴얼 - 페이지 7
{카테고리_이름} Epson Endeavor 486C에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Endeavor 486C 9 페이지. Product information guide
Epson Endeavor 486C에 대해서도 마찬가지입니다: 제품 지원 게시판 (21 페이지)
페이지 인쇄
Video Memory
If the computer has 512KB of video memory, you can install
four 256K
4 bit, 70ns, 20-pin DRAM ZIP (Zig-zag Inline
x
Package) chips to increase the video memory to 1MB. The
following table lists compatible DRAM ZIP chips.
Supported Video ZIP Chips
Cache Memory
Additional cache memory can be installed in eight sockets in
Bank 0 and Bank 1 on the main system board. The figure
below shows how the SRAM are distributed.
8KB or 32KB SRAM chips can be installed. Bank 0 must be
filled before Bank 1. The SRAM type used for RAM in
locations U15 and U16 must match the type installed in the
banks. The table below shows the possible configurations.
Cache Memory Configuration
Hard Disk Drive Types
The table below lists types of hard disk drives supported by
the computer. Check this table and the hard disk manual to
find the correct type number(s) for the hard disk drive(s)
installed in the computer. Enter the type number(s) when you
set the hard disk drive configuration in the SETUP program.
Hard Disk Drive Types
7/15/93
EPSON Endeavor 486C
EPSON Endeavor 486C-7