Motorola P080 사용자 설명서 - 페이지 25

{카테고리_이름} Motorola P080에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola P080 33 페이지. Professional radio
Motorola P080에 대해서도 마찬가지입니다: 판매 매뉴얼 (44 페이지)

페이지 인쇄

Sending a New Number

You enter the phone number by pressing the

relevant keys on the keypad.

Method

Enter the phone number by using the

Live Dial

keypad; the radio sends out the numbers

as the keys are pressed.

1. Enter the phone number by using

the keypad; the radio saves the

Buffered

selected numbers in a buffer.

Dial

2. Press and release the PTT; the

radio sends out the numbers in its

buffer.

The Phone Conversation

Once the radio has connected to the intended party,

you can begin the conversation. Even though this is

a phone call, your conversation mimics a radio call

(that is, both parties speak in turn).

1. Press and hold the PTT, while talking into the

microphone.

2. Release the PTT when you Þnish what you

want to say, and wait for the response.

3. Repeat steps 1 and 2 until the conversation

ends.

English

Steps to Take

Ending the Phone Call

Just as the radio needs to send the access code

when starting a phone call, the radio needs to send

the deaccess code to end the phone call.

The radio can send the deaccess code in any of the

following ways:

¥ manual, and

¥ automatic.

Check with your dealer for details.

1. If your radio sends the deaccess code man-

ually, dial the deaccess code from the key-

pad.

2. Press the Phone button to exit phone mode.

NOTE: Radios using the automatic method

will send the deaccess code

automatically.

Exit the phone mode using the menu:

( to exit phone mode and

return to

Hold ( to exit the Menu Mode.

NOTE: Radios using the automatic method

will send the deaccess code

automatically.

PHONE