Dilux AP1714 사용자 설명서 - 페이지 6

{카테고리_이름} Dilux AP1714에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dilux AP1714 8 페이지. Decorative lighting – spacing matching series

Cutting Instruction

According to the length of the multiple of the strip light minimum cutting unit,

measure the aluminum profile and mark the area need to be cut, and the cutting

blade is biased toward the portion to be cut.

2. Cautions：

 It is recommended to slow down the speed when cutting. If the speed is too fast, the mask will be

damaged.

 The inner profile do not install with strip light when cutting.

 Fix it firmly when cutting, the fracture after cutting should be flat and not skewed. Round off the

fracture, ensure there is no burr, and the metal debris in the profile should be cleaned.

 Recommended cutting speed 1000-1200rpm