Epson Equity III 제품 지원 게시판 - 페이지 18
{카테고리_이름} Epson Equity III에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Equity III 45 페이지. Product support bulletin(s)
Epson Equity III에 대해서도 마찬가지입니다: 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (19 페이지), 제품 설명서 (13 페이지)
페이지 인쇄
EQUITY II MCY BOARD Y147205000 & Y147206000 JUMPER CONFIGURATIONS
MCY
board
Y147205000
and
Y1472056000
differences.
MCY P/N Y147206000
boards have the
following
improve-
ments over the
Y147205000
board.
* Serial port works
over 1200 baud.
* Concurrent oper-
ation of 8087 &
optional
Dynamic
RAM or EGA/VGA.
* Topview fix in-
corporated
on
MCY (main) board.
J1
*
and J2 should be in position 2 to enable DMA RAM refresh to the
option slots for expanded memory boards or EGA/VGA video boards.
The 8087 will work in DMA refresh mode with the Y147206000 board.
J1
*
and J2 should be in position
The V30 runs about 20% faster in this position. The jumpers must be
in position
* J3 and
J4
* J3 and
J4
keyboard.
NOTE: DO NOT ATTEMPT TO USE THE EPSON KEYBOARD WITH JUMPERS J3 AND
J4
On
Batt
Off
JUMPER
1
to enable an 8087 with the Y147205000 MCY board
should be in position 1 to use an IBM compatible keyboard.
should be in position 2 (default) for the Equity
POSITION 1 AS DAMAGE MAY RESULT!
-----
Reset
Dip Switch
CONFIGURATIONS
1
to disable DMA RAM refresh.
Page 5 of 6
-----
Vol. Keyboard