Dilux AP5712C 사용자 설명서 - 페이지 5
{카테고리_이름} Dilux AP5712C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dilux AP5712C 8 페이지. Decorative lighting – spacing matching series
페이지 인쇄Installation Guide
Trim Recessed
1. Attach strip light at the center of the inner
bottom of aluminum profile.
3.
Slot the place where the profile need to be
installed. The length of the groove is determined by
subtracting 8 mm from the actual length of the
product. It is recommended that the width be 19 mm
and the depth be greater than 6 mm. Also reserve a
DC power cord.
5. Connect the profile cable to the reserved DC
power cable, pay attention to the positive and
negative poles. Put the profile into the slot and press
it.
（AP2507B）
2. Install the front-end cap and PC cover.
4. Apply glass glue on both sides of the groove
6. After the glue is cured, the profile is firmly adhered.
The installation is complete.