Motorola RADIUS GP300 사용 설명서 - 페이지 28

{카테고리_이름} Motorola RADIUS GP300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola RADIUS GP300 47 페이지. Portable radios
Motorola RADIUS GP300에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지)

페이지 인쇄

GP300 Portable Radios

Optional Signalling Enhancements

(Not Available on 2 Channel Models)

PTT ID

When on a channel with the

PTT ID feature, the radio

transmits an identiﬁcation

code (unit ID) to the base sta-

tion, indicating which portable

is in operation. This code is

sent whenever the PTT button

is depressed. A sidetone is

heard as the ID is being trans-

mitted; when the tone ends,

start your voice message in

the standard manner. The

LED glows red during the time

that the ID is sent out.

Call Alert (Decode)

Call Alert works similarly to tone-only pagers. When a Call

Alert (page) is received, a series of 4 beep decode tones

are heard while the LED ﬂashes yellow. The LED continues

ﬂashing yellow and the alert tone continues until the call

alert is acknowledged by the radio. If you transmit by push-

ing the PTT button or change the rotary channel selector

while a Call Alert signal is in progress, the LED stops ﬂash-

ing and the Call Alert tone is disabled.

Voice Selective Call (Decode)

This feature operates like a standard pager providing a one-

time voice message. When a Voice Selective Call is received

by the radio, a one-time 2 beep decode tone is heard while

the LED ﬂashes yellow. The radio unmutes and the voice

message is heard. The LED continues ﬂashing yellow while

the voice message is heard. The Voice Selective Call feature

does not require any action to acknowledge the message

and after the transmission is completed, the radio returns to

normal operation.

Optional Signalling Enhancements