Epson Equity 386/25 PLUS 제품 지원 게시판 - 페이지 9

{카테고리_이름} Epson Equity 386/25 PLUS에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Equity 386/25 PLUS 11 페이지. Product information guide
Epson Equity 386/25 PLUS에 대해서도 마찬가지입니다: 제품 정보 매뉴얼 (9 페이지)

Epson Equity 386/25 PLUS 제품 지원 게시판

FLOPPY DRIVES:

Q23.
What types of floppy disk drives will work on the Equity 386/25 PLUS?
A.
The Equity 386/25 PLUS comes standard with a 5.25", 1.2Mb floppy disk
drive. There is built-in BIOS support for industry standard 360Kb and
1.44Mb, 3.5" half-height floppy disk drives as well as the 720Kb, 3.5"
floppy drive. All four drive sizes are available from Epson.
Q24.
Will the Equity 386/25 PLUS support 3 floppy disk drives?
A.
No, not directly. The Epson controller and ROM BIOS supports a
maximum of two floppy drives.
Q25.
Can the floppy disk controller be disabled?
A.
No. The floppy disk controller is integrated in the system board and there
are no jumpers to enable or disable it. lf an additional or 3rd party board is
present the BIOS ROM auto-configure at bootup.
MEMORY:
Q26.
What type of RAM chips are used in the Equity 386/25 PLUS?
A.
The Equity 386/25 PLUS utilities eight (8) D424256C-70 (256x4), 70 nSec
RAM chips plus panty on the
Q27.
How do I increase
A.
The standard Equity 386/25 PLUS system includes 2Mb of on-board
memory. You can add SlMMs (single in-line
on-board memory.
memory in the computer must be one of the following:
4Mb, 6Mb, 8Mb, 9Mb, 10Mb, 12Mb or 16Mb.

SIMM configuration

Memory can also be expanded through the use of third party memory boards
using an l/O slot Epson does not recommend a third-party memory board.
system board.
the memory of the Equity 386/25 PLUS?
added SIMMs the total amount of
With
can be found on page 5-17 in the Users' Guide.
PSB No: S-0125A
Page: 6 of 7
memory modules) to increase
1 Mb, 2Mb, 3Mb,
on-board