Motorola Vanguard 200 사용자 설명서 - 페이지 23

{카테고리_이름} Motorola Vanguard 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola Vanguard 200 32 페이지. Motorola two-way radio user guide cm 200

SCAN

You can monitor multiple channels and receive

any calls that are transmitted on them.

Channels can be programmed into a scan list

by your dealer. Your radio automatically

switches to a scan list channel when it detects

activity on it.

The green LED indicator blinks during a scan

operation and stops blinking when the radio

switches to a channel.

You can start or stop a scan operation by:

To start or stop a scan operation, press the

preprogrammed Scan button (see page 13).

–or–

Select a channel that has been

preprogrammed by your dealer to start Auto

Scan.

Note:

You do not need to press a prepro-

grammed Scan button.

Select a channel that has not been

preprogrammed by your dealer to stop Auto

Scan.

The Talkback feature allows you to respond to a

transmission while scanning. If transmission is

detected on a channel while scanning, the radio

will stop on that channel for a preprogrammed

period of time. During this "hangtime" you may

respond by pressing the PTT button.

Notes: If transmission ceases or if the PTT

button is not pressed for a prepro-

grammed duration, the radio continues

to scan. The LED scan indicator stops

blinking while the radio is in hangtime.

English