Motorola BLISS54-2 사용자 설명서 - 페이지 12
{카테고리_이름} Motorola BLISS54-2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola BLISS54-2 30 페이지. 4.3" video baby monitor
Motorola BLISS54-2에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지)
페이지 인쇄
3. Using the Baby Monitor
Please read these instructions carefully, and be aware that this baby monitor is
only intended as an aid. It is not a substitute for responsible adult supervision.
3.1
Setting Up
• Make sure that the Baby Unit and Parent Unit are both switched on.
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
NOTE
Do not place the Baby Unit within reach of a child or baby! If there is
interference with the picture or sound, try moving the units to different locations,
and ensure that they are not close to any other electrical equipment.
If you place the Parent Unit and Baby Unit too close together, you may hear a
high pitched noise. This is not a fault. The units are designed to be operated at
some distance apart. So move the units further apart.
3.2
Power On or Off the Baby Unit
Slide the Power
ON
The power indicator lights up in blue.
Slide the Power
ON
Unit. The power indicator goes off.
3.3
Power On or Off the Parent Unit
Press and hold the Power 0 button to switch on the Parent Unit. The power
indicator lights up in green.
Press and hold the Power 0 button to switch off the Parent Unit. The power
indicator goes off.
12
switch to the ON position to switch on the Baby Unit.
OFF
switch to the OFF position to switch off the Baby
OFF
Using the Baby Monitor