Motorola CONNECT20-3 사용자 설명서 - 페이지 13

{카테고리_이름} Motorola CONNECT20-3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CONNECT20-3 44 페이지. 4.3" wi-fi video baby monitor

3. Using the Baby Monitor

3.1

Place the Baby Unit in a convenient location (e.g. on a table) and

point the camera lens towards the area you want to monitor.

Adjust the angle of the Baby Unit's camera until you are satisfied

with the image shown on the Parent Unit.

NOTE

Do not place the Baby Unit within the baby's reach! If there is inter-

ference with the picture or sound, try moving the units to different

locations, and ensure they are not close to other electrical equipment.

3.2

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear

images in the dark. When the built-in photo sensor on the top of the

Unit detects a low level of ambient light, the LEDs will automatically

activate and the screen on the Parent Unit will display in black and

white. The

icon will be displayed at the top of the screen.

3.3

Press and hold the TALK button

your baby through the Baby Unit's loudspeaker.

The

icon will be displayed at the top of the LCD screen.

3.4

Press

VIDEO On/Off button to turn the LCD screen on or off,

whilst still leaving the audio monitor on.

3.5

Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back

of the Baby Unit will be displayed at the top of the LCD screen. The

readings will turn RED if the temperature goes above 29°C / 84°F

or below 14°C / 57°F. The reading will change to HH °C / °F if the

temperature goes above 36°C / 97°F. The reading will change to LL

°C / °F if the temperature goes below 1°C / 34°F.

Using the Baby Monitor

on the Parent Unit to talk to