Motorola LUX64CONNECT 사용자 설명서 - 페이지 16
{카테고리_이름} Motorola LUX64CONNECT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola LUX64CONNECT 50 페이지. Hd wi-fi video baby monitor
페이지 인쇄
4. If an alarm time is selected, the Parent Unit will beep for about
45 seconds after every 6, 4 or 2 hour period.
4.6
Camera Control
4.6.1
Add (pair) a camera
1.
Press the M button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until
and the
del/
3. Press the + UP button or - DOWN button to select
press the O button to confirm.
4. Camera
- DOWN button to select the desired Camera, and press the O
button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
5. Press and hold the PAIR button on the underside of the Baby
Unit until the Parent Unit finds the camera, beeps and PAIR OK
appears on the screen. The video from the camera will then
appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2
View a camera
1.
Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
highlighted, and the
pop up.
3. Press the + UP button or - DOWN button to select
press the O button to confirm.
4. Camera
- DOWN button to select the desired Camera, and press the O
button to view the picture from that camera.
Note:
Only camera locations with a * can be selected.
16
add/
view/
/
/
/
will pop up. Press the + UP button or
del/
/
/
/
will pop up. Press the + UP button or
scan menu will pop up.
add/
view/
Parent Unit Menu Options
is highlighted,
add, and
is
scan menu will
add, and