Motorola MBP10S 사용자 설명서 - 페이지 8

{카테고리_이름} Motorola MBP10S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MBP10S 21 페이지. Digital baby monitor
Motorola MBP10S에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

The Parent unit can be used with either the rechargeable battery pack (2.4V

600mAh Ni-MH rechargeable battery pack supplied) or via the power adapter

supplied.

WARNING:

Never use ordinary, non-rechargeable batteries. The power outlet adapter

provides a charging function, and non-rechargeable batteries may explode

and cause damage!

NOTE

The Ni-MH rechargeable batteries must be charged for 16 hours before using

the Parent unit without the power outlet.

We recommend the rechargeable batteries are installed, so that the unit

continues to work in the event of a power failure.

1. Using a screwdriver, turn the screw of the battery cover on the back of the

parent unit 90 degrees in a counterclockwise direction. Remove the

battery cover.

NOTE

Rotate the belt clip to its hanging position to make it easier to access the battery

compartment.

Do not try to turn the screw further beyond the OPEN position marked on the

cover.

2. Insert one battery pack with 2 AAA size Ni-MH rechargeable batteries.

3. Close the battery compartment and turn the screw back 90 degrees back

in a clockwise direction.

4. Press and hold

has battery power.

5. Press and hold

. The Power (ON /

to switch off the parent unit.

) LED will illuminate red if it only

Getting Started