Motorola MBP28 Triple 빠른 시작 매뉴얼

{카테고리_이름} Motorola MBP28 Triple에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MBP28 Triple 2 페이지.
Motorola MBP28 Triple에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Quick Start Guide

MBP28, MBP28/2, MBP28/3, MBP28/4

MBP28 Twin, MBP28 Triple, MBP28 Quad

For a full explanation of all features and instructions, please refer to

the User's Guide.

1. Setting up your digital baby monitor

1.1 Camera unit power supply

1. Insert the DC plug of the power adapter with the smaller DC

plug into the DC socket in the side of the camera unit, as

shown.

2. Connect the other end of the power adapter to a suitable mains

socket or power outlet.

DC SOCKET

DC PLUG

1.2 Parent unit battery installation

A rechargeable battery pack is supplied and should be fitted, so that

the parent unit can be moved without losing the link and picture from

the camera unit(s). Charge the parent unit before you use it for the

first time or when the parent unit indicates that the battery is low.

1. Take off the belt clip/stand.

2. Slide off the battery compartment cover.

3. Insert the plug of the battery pack into the socket inside the

battery compartment, and fit the battery pack into the

compartment.

4. Replace the battery compartment cover and reinstall the belt

clip/stand (refer to section 1.3).

5. Insert the DC plug of the power adapter with the bigger DC plug

into the DC socket in the side of the parent unit.

6. Connect the other end of the power adapter to a suitable mains

socket or power outlet.

7. The Charging Indicator comes on.

Battery SOCKET

Battery PLUG