Motorola MBP36S 사용자 설명서 - 페이지 10

{카테고리_이름} Motorola MBP36S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MBP36S 28 페이지. Digital video
Motorola MBP36S에 대해서도 마찬가지입니다: 사용자 설명서 (29 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (31 페이지), 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (28 페이지), 빠른 시작 매뉴얼 (2 페이지)

2.3

Parent Unit Power Supply

IMPORTANT

Installing the rechargeable battery pack and charging it fully before use is

recommended, to allow temporary battery operation if the unit is moved.

1. Connect the small plug of the power adapter to the parent unit and the

other end to a suitable mains power socket. Only use the enclosed power

adapter (5V DC / 600mA) with the micro-USB style plug.

2. Press and hold the

to turn ON the parent unit.

3. Once the baby and parent units are switched on, the display on the parent

unit will show the video captured by the baby unit.

4. If there is no connection or you are out of range, the video display will be

replaced by a "No Camera" symbol and the unit will beep every 5 seconds.

Move the parent unit closer to the baby unit until the link is re-established.

5. Press and hold the

finishes scrolling, to turn OFF the parent unit.

NOTE

The battery icon

a beep every 16 seconds. The battery needs to be recharged. The battery pack

takes about 12 hours to charge fully.

When charging

1. During charging, the battery icon at the top right of the screen indicates

that it is charging. If the parent unit is turned off while charging, a plug icon

shows for 5 seconds, followed by a battery icon for 45 seconds. The Blue

LED at the top left indicates the mains adapter is plugged in.

POWER ON/OFF button for more than 1 second

POWER ON/OFF button, until the progress bar

turns RED to indicate that the battery is low, and it gives

Getting Started