Motorola MBP41/4 사용자 설명서 - 페이지 10
{카테고리_이름} Motorola MBP41/4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MBP41/4 27 페이지. Digital baby monitor
Motorola MBP41/4에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (27 페이지)
페이지 인쇄
When charging
1.
If the parent unit is turned OFF, when the adapter is plugged in, a
mains plug logo will display briefly, followed by a large battery icon
with internal segments cycling for 45 seconds. The Blue LED in the
top left corner lights up to indicate the adapter is plugged in.
2.
If the parent unit is turned ON, when the adapter is plugged in, the
battery icon in the screen's top right corner will show that the battery
is charging by cycling the internal segments. The Blue LED in the top
left corner lights up to indicate the adapter is plugged in.
2.4
Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need
to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
M
1. Press the
pop up.
<
2. Press the
del/add/view/scan
and the
+
3. Press the
the OK button to confirm.
CAM 1
CAM 2
4.
/
DOWN button to select the desired CAM and press the OK button to
start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
10
Menu button of the parent unit and the menu bar will
LEFT button or
menu will pop up.
-
UP button or
CAM 3
CAM 4
/
/
will pop up, press the
>
RIGHT button until
DOWN button to select
C
is highlighted,
ADD
, and press
+
UP button or
Getting Started
-