Motorola MBP41S-2 빠른 시작 매뉴얼

{카테고리_이름} Motorola MBP41S-2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MBP41S-2 2 페이지. Digital video monitor
Motorola MBP41S-2에 대해서도 마찬가지입니다: 사용자 설명서 (27 페이지), 사용자 설명서 (29 페이지)

페이지 인쇄
Motorola MBP41S-2 빠른 시작 매뉴얼
MODELS:
MBP41S
MBP41S-2
MBP41S-3
MBP41S-4
WARNING:
Strangulation Hazard. Children
have STRANGLED in cords. Keep
this cord out of the reach of
children (more than 1 metre
away). Never use extension cords
with AC Adapters. Only use the
AC Adapters provided.

QUICK START GUIDE

For a full explanation of all features and instructions, please refer to the User's Guide.
1. Setting up your Digital Video Baby Monitor
A. Baby Unit Power Supply
• Connect the DC plug of
the power adapter to the
DC JACK
DC jack at the bottom of
the Baby Unit and the
other end to the mains
power.
• Only use the supplied
power adapter (5V DC/
1000mA).
• Slide the ON/OFF switch
to the ON position.
DC PLUG
C. Fastening the battery cover of the Parent Unit
• Place the battery
compartment cover over
the battery, making sure
that the battery wires are
carefully pushed down and
the cover fits properly.
• Gently tighten the screw in
a clockwise direction using
a small cross head or flat
end screwdriver.
B. Parent Unit Battery Installation
Black
Red
D. Parent Unit Power Supply
• Connect the small plug of the power
Micro USB Socket
• Only use the supplied power adapter
• Charge for at least 12 hours before first
Micro USB Plug
UK EN
• The rechargeable battery pack supplied
should be installed so that the Parent
Unit can be moved without losing the
link and picture from the Baby Unit(s).
• Charge the battery in the Parent Unit
before you use it for the first time or
when the Parent Unit indicates that
battery is low.
• Insert the wire tabs of the rechargeable
battery pack into the contact slots as
shown and fit the battery pack into the
compartment.
adapter to the Parent Unit and the other
end to the mains power.
(5V DC / 600mA) with the Micro USB
plug.
use.