Epson ExpressStation 제품 지원 게시판 - 페이지 5
{카테고리_이름} Epson ExpressStation에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ExpressStation 11 페이지. Product information guide
Epson ExpressStation에 대해서도 마찬가지입니다: 설정 매뉴얼 (26 페이지), 제품 정보 매뉴얼 (9 페이지)
페이지 인쇄
Page Two
VGA/EGA, CGA40, CGA80, MONO or not installed
56/60 or 72 HZ.
Interlaced 44/88 HZ.
Non Interlaced 60 HZ. or 72 HZ.
Note that if you change this setting, you must reboot the computer in order
for the change to take effect.
primary/secondary
installed/not installed
no/yes
installed/not installed
Page Three
enabled/disabled
displays the size of base memory in KB. This size will differ from what you
set in Base Memory Above 512K only if there is a failure in base memory.
displays the amount of memory in the system above 1 MB. The memory
includes SIMMS on the system board and memory on add-in boards. You
cannot change this setting through setup.
enabled/disabled
enabled/disabled
disabled
Base Address 378H Compatible
Base Address 278H Compatible
Base Address 378H Bi-Directional
Base Address 278H Bi-Directional
PSB No: S-0147
Page: 4 of 9