Epson Powerspan DT 제품 정보 매뉴얼 - 페이지 5

{카테고리_이름} Epson Powerspan DT에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Powerspan DT 12 페이지. Product information guide

Video Memory, Modes, and Monitors

This system comes with 1MB of VRAM soldered on the main

system board. You can increase the video memory to 2MB by

installing eight VRAM ZIP chips (256KB

mode). You must fill all eight sockets.

The table below lists the video modes supported by the

system.

Resolutions and colors

(1) bpp=bits per pbel: 4 bpp=l6 colofs, 6 bpp=256 colors,

16 bpp=65,000 colors, 24 bpp~l6.7 mlson colors

(2) 32 MHz setting

(3) 40 MHz setting

(4) Interlaced

4, 60ns, fast-page

3/94

The table below lists the monitors that are directly supported

by the Mach32 accelerator.

Check the monitor documentation to see if its characteristics

match one of the listed types. If so, select that type in the

Mach32 installation program.

For EPSON monitors, see the second table for information on

the monitor type to select.

If the monitor does not match any of these types, set up a

custom monitor.

Mach32

monitor list

EPSON monitor types

Hard Disk Drive Types

This system comes with a hard disk auto-sensing feature.

Some drives do not support the auto-sensing feature. If the

system does not correctly define your hard disk drive, you

can define up to two drive types in SETUP.

EPSON PowerSpan DT

EPSON PowerSpan DT - 5