Motorola VM855-3 CONNECT 사용자 설명서 - 페이지 12

{카테고리_이름} Motorola VM855-3 CONNECT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola VM855-3 CONNECT 36 페이지. 5" portable wi-fi video baby monitor
Motorola VM855-3 CONNECT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

2.2

Parent Unit Power Supply

IMPORTANT

The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium

ion battery 200 0mAh, to give up to 5 hours monitor operation), please charge it

for 16 hours before initial use. The battery is not a user-accessible item. Please

contact the helpline if you think it needs replacing.

1. Connect the DC plug of the power adapter to the Parent Unit and the

other end to a suitable electrical outlet. Only use the enclosed power

adapter (5V DC / 1000mA) with the DC plug.

2. Press and hold the 0 POWER ON/OFF button for 3 seconds to switch ON

the Parent Unit.

3. Once the Baby and Parent Units are switched on, the display on the Parent

Unit will show the color video captured by the Baby Unit, but if the baby's

room is dark, the video will display in black and white, with a

showing, due to the infra-red illumination by the Baby Unit.

4. If there is no connection or you are out of range, the video display will go

off, a

symbol will appear on the screen, and the Parent Unit will beeps

continually. Move the Parent Unit closer to the Baby Unit until the link is re-

established.

5. Press and hold the 0 POWER ON/OFF button, until the progress bar

finishes scrolling, to turn OFF the Parent Unit.

NOTE

The battery icon

parent unit will beep every 15 seconds. The battery needs to be recharged; it

will take16 hours to charge fully.

turns RED to indicate that the battery is low, and the

icon

Getting Started